Exactly how to Troubleshoot and Fix an Electric Water Heater
Exactly how to Troubleshoot and Fix an Electric Water Heater
Blog Article
How do you really feel on the subject of No Hot Water — Water Heater Repair?
Lots of modern houses make use of an electrical water heater for their heater, due to its comfort and simplicity of use. However, much like any other electric home appliances, troubles may arise with its use, unexpectedly. It can be really aggravating to get up to a cool shower as opposed to a hot one or having your bath with water that isn't hot sufficient or perhaps also warm. Whatever the case may be, water heater issues can be fairly aggravating. Fortunately, we've made a checklist of feasible solutions to your water heater problems. There are a variety of factors that could trigger most of these troubles, maybe an issue with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you shut off the major power supply for safety. Whatever the issue is, getting it taken care of need to not position excessive of a concern if you adhere to these actions:
Call A Professional:
If after replacing all defective parts as well as resetting your temperature level, the hot water heater still isn't functioning, you might require to speak to an expert plumber for a professional opinion. The trouble with your heater could be that the hot and cold taps have actually been switched over or it might be undersized for the quantity of hot water needed in your home. Whatever the situation might be, a specialist plumber would certainly help solve the issue.
Inspect Your Power Supply:
As fundamental as this might appear, it is really necessary. Without adequate power, your water heater will not work. So the first thing to do when your water all of a sudden retires is to verify that it isn't a power trouble. Examine if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the problem, just turn it off and on once again. Replace any type of damaged or worn-out fuse. Check the home appliance with power after these modifications to see if it's currently working.
Inspect Your Thermostat:
If your water heater still isn't working or the water coming out isn't hot enough, you may need to check the temperature setups on your top thermostat. Ensure the breaker is turned off prior to doing anything. Open the access panel and also press the red switch for temperature reset above the thermostat. This should aid heat up the water. Turn the circuit breaker back on and also check if the trouble has actually been dealt with.
Examine the Burner in the Water Heater:
If it's not a power trouble, then attempt taking a look at your heating element if it is still functioning. Evaluate each of your heating elements to make sure the problem isn't with any one of them. If any of them is damaged, replace that part and after that check whether the warm water is back on.
Conclusion
Hot water heater problems are not constantly major. Many of them are because of minor problems like a blown fuse or worn-out burner. Replacing the malfunctioning parts must do the trick. Nevertheless, if you are still unable to fix the trouble, give a call to your nearby plumber ahead to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I was made aware of that editorial on What Would Cause My Electric Water Heater to Stop Working? from a friend on a different web page. Sharing is good. Who knows, you may just be helping someone out. We cherish reading our article about No Hot Water — Water Heater Repair.
Book Instantly
Report this page